( New Zealand) +64 9 415 0404 |  info@watertest.co.nz

  • FAS-DPD Chlorine & pH Kit

    Order Code 7514-pH

    The FAS-DPD (Chlorine) and pH Test Kit was designed for public pool operators. The pool operator can measure Free and Total Chlorine levels in 0.2 or 0.5 ppm increments over a wide range by adding Chlorine Titrant that creates a clear endpoint color reaction.

  • Free Chlorine & pH Kit

    Order Code 7019

    DipCell Test Kit, measures pH 6.8-8.2 & Free Chlorine .5-10ppm

  • Sodium Chloride (Salt) Test Kit

    Order Code 3156

    The (Salt) Sodium Chloride Test Kit is an easy-to-use drop count titration kit for salt water pools. The salt content of the pool is measured by counting each drop of titrant added to the sample tube. The kit comes in a sturdy, plastic case with two 30 mL salt titrant bottles, one 15 mL chloride reagent bottle, and one clear sample tube with cap.

  • Biguancide &pH kit

    Order Code 7016

    DipCell Test Kit, measures pH 6.8-8.2 & Bigunacide concentrations from 0-75ppm

  • Sequestering Agent Test Kit

    Order Code 4064-01

    Designed for the pool professional to measure the concentration (ppm) of active sequestering agent in the water sample from 0 to 20 ppm. To prevent staining from metals on the pool surface a sequestering agent chemical is often recommended.

  • Alkalinity & Calcium Hardness Test Kit

    Order Code 3583

    The Alkalinity and Calcium Hardness TesTabs® test kit uses one tablet per test factor which is added to a test tube of water sample to develop a color. Sample water is added performing a back titration until an endpoint color change occurs. The results are read directly from the test tube which measures Alkalinity and Calcium Hardness from 60 to 400 ppm. The kit includes simple to read instructions, 30 TesTabs® tablets, a water sample bottle along with a pre printed test tube with Alkalinity and Calcium Hardness levels.

  • Low Range Phosphate Test Kit

    Order Code 3466

    The Low Range Phosphate Test Kit measures phosphate levels from 0 to 1,000 ppb with a laminated color chart. The kit includes unit-dose, foil packaged tablet reagents for 50 tests that are simple to use with a sturdy plastic test tube.

  • Cyanuric Acid Test Kit

    Order Code 6838

    The Cyanuric Acid (Stabilizer) test kit measures Cyanuric Acid levels at 20, 30, 40, 50, 60, 80 and 100 ppm. The kit includes 50 Cyanuric Acid visual grade TesTabs® tablets that are added to a test tube. Once the tablet disintegrates then the analyst would look down through the test tube and measure the Cyanuric Acid level by the disappearing dot method.

  • Copper & Iron Metchek Test Kit

    Order Code 3611-01

    The test kit uses a color chart that measures Copper and Iron levels at 0.1, 0.3, 0.6 and 1.0 ppm. The test kit is simple to use with just adding 3 drops of Copper reagent to a 5 mL test tube of water then matching the color reaction to the color chart.

    The Iron test is measured by adding 5 drops of Iron reagent along with an Iron TesTabs® tablet to a 5 mL test tube of water then match the reacted sample water with the color chart. Included with the kit is an easy to read diagrammed instructions, test tubes, color chart and enough testing reagents to measure 50 tests.

  • Low Range Manganese Test Kit

    Order Code 3588-02

    The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.

    Applications: Pool and Spa, Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater